Phone: 248-969-7490
Search our Site
Tip Dressing Tool
To remove mushroomed nose material on a pair of tips of 4 or 5 RW size, having pointed or dome noses. Other nose design dressers on special order.
Weld Current Monitor
Features and Benefits:
- ο Measures weld current, weld cycles and conduction degrees
- ο Battery-free memory
- ο Automatic power-off system
- ο Up to 9 impulse memory capacity
- ο Large, easy-to-see liquid crystal display
- ο Oil and dust proof case
- ο Torodial coil, battery charger and carrying case include
Weld Flash Shield
*Standard size shields have a bell that extends approximately 1-1/2”
**Mini flash shields have a bell that extends approximately 3/8” which provides better visibility for manual weld gun operations.
| Diameter of Electrode | Standard Flash Shield* | Mini Flash Shield** | ||
| 1/2” | Not Available | FSJN500 | ||
| 5/8” | 1089FS625 | FSJN625 | ||
| 3/4” | Not Available | FSJN750 | ||
| 7/8” | 1089FS875 | Not Available |
Taper ToolTM
Patent Pending Taper ToolTM hones the taper on shanks and electrode arms to prolong the life of a gun arm. Repairing tapers on shanks and arms is expensive. Downtime in production, searching for the correct arm, disassembling the arm, cutting out the old taper, soldering in a new taper, aligning and reinstalling the arm, cleaning up the cooling water mess, all takes a lot of time. Now, minor repairs to worn tapers and preventative maintenance can extend the life of shanks and arms.
Cap Extractor Fork
These hardened steel wedge type forks will make the removal of electrodes caps quick and easy. They can be used on both male and female caps.
Tip Extractor Large
EX-10-A, Part No. 601-0231
Cap Extractor
Cap extractors are made for three shank sizes: Models EX-4F, EX-5F, and EX-6F.
Male Cap Extractor
Male cap extractor has long lever handles for easier cap removal. In two dual-size models: EX-45 and EX-56.
Tip File
To restore original contours of welding tips use this two-inch radius file. Part No. 601-0120.
Tip Socket Reamers
Tip Socket Reamers Hole in reamer center permits water tube entry; no need to dismantle holder.
Tuffcap Socket Reamers
To ream or dress sockets to hold male caps.
Force Gauges
We offer one of the broadest product lines available today We offer a broad range of weld force gauges, available with accuracies from 0.5% for Digital-Electronic gauges; to 2% accuracy for the Digital-Hydraulic which has a digital output driven by hydraulics; to our Standard Hydraulic models with 2%-3% accuracy. All are available in English and metric readouts.
View Our Catalogs
 |
 |
 |
 |
 |
 |
 |
 |
TecWelding Sales
3202 Adventure Lane
Oxford MI 48371
Phone: 248-969-7490
Fax: 248-969-7496