Search our site


Phone: 248.969.7490


Impeder Support Systems

impedersupportsystem1For optimum performance & maximum life, all impeders should be supported to ensure that they are properly positioned & do not drag on the inside of the tube. EHE manufactures a range of impeder holders to suit all types of tube mills. Interchangeable adapters allow both through flow & return flow types to be used with the same basic support system. The three way adjustable mounting bracket & clamping system provides a simple & reliable means of adjusting the impeder position. Impeder holders are available to cover impeders from 1/4" (6mm) to 6" (150mm) in seven overlapping ranges. An optional second support prevents long assemblies from drooping under their own weight & enables the vertical position of the impeder in the tube to be accurately maintained.

Return Flow Impeder Support System  Specification pdf